DC818 Conveyor belt quick repair adhesive
conveyor belt repair strip
I. Uses.
1、Repairing longitudinal tear of conveyor belt, hole, surface glue off, surface wear, filling the interfaced seam of hot vulcanization joint.
2、For repairing cable jacket and filling rubber at joints.
3、Rubber rollers, cans, and other rubber products repair, repair.
The second, the use of technology.
1, will be repaired disposal in the horizontal position, extended with repair around the cut or make steps.
2、Use an angle grinder to beat the hair.
3, will probably leak glue place with tape paper seal.
4、After component A is opened, pour all the component B into the component A can and stir it evenly with a plastic stick (stirring along one direction, about 2 minutes). The stirred adhesive should be used up as soon as possible, especially when the temperature is higher than 25°C.
5、Pour the required amount of repair glue into the required amount after wiping a layer on the place to be repaired first, smooth it out with a scraper and leave it for a few hours to harden the surface before starting to use.
Performance index
1、Hardness after curing: 65 Shore A.
2, after curing tensile strength: ≥ 5.5Mpa.
3, 180 peel strength after curing: canvas belt ≥ 5KN / m; rubber belt ≥ 6KN / m.
4, elongation at break after curing: ≥ 400%.
5, product specifications.
(Group A): 350g/can.
(Group B): 10g/can.
5、Warranty period: twenty-four months.
